MPA Portable Amplifier

MPA Portable Amplifier is a portable, rugged, closed-case solution to boost cellular signal up to 100dB gain in both planned events and emergency-response situations

MPA Portable Amplifier

Available in two models, the MPA Portable Amplifier from DH Wireless Solutions is a portable, rugged, closed-case cellular amplifier that is easily transported in vehicles to enhance cellular connectivity for both planned events and emergency response situations. The MPA Go M is a Smart Cellular Amplifier for bands 2, 4, 5, 12, 13. Or choose the MPA Go Red for public safety and first responder applications using bands 12 and 14.

Connect to your MPA portable amplifier with the Cel-Wave app for Android and iOS smartphones and tablets, to easily boost cellular signal whenever it’s needed. In minutes, the MPA improves vital cellular communications to keep single or multiple users connected in areas where cellular signal is troublesome. It’s NEMA 4 rated weather resistant to withstand harsh conditions including dust and water exposure.

The MPA is configured for industry-leading 65 dB gain in mobile mode, delivering the best voice/data wireless performance; and in stationary mode, it delivers 100 dB gain—which is up 1000x greater than other solutions on the market.

Components

  • Nextivity Cel-Fi Signal Booster
    • Choose Cel-Fi GO M Booster or Cel-Fi GO RED booster
  • Omni Directional Server Antenna
  • Omni Directional Donor Antenna
  • SMA Antenna Connector
  • 12V DC Input
  • 110-120V AC Input
  • 12-14V DC
  • AC/DC Flexible Power Cords
    • AC Power Cord
    • DC Power Cable with 12V Auto Connector
    • DC Power Cable with 2.5mm Barrel Connector
  • Cable Pouch
  • Portable, Rugged Outdoor-Ready Case

Performance

  • 3G/4G/LTE
  • Gain up to 100 dB
  • NEMA-4 Rated for harsh conditions including water and dust resistant
  • Operating Temperature Range: 32° – 104° F (0° – 40° C); Storage 0° – 130° F (0° – 60° C)
  • Switchable mobile and stationary modes switch in < 1 minute
  • Two Models Available
    • Verizon, AT & T, T-Mobile & Sprint carrier switching on the fly (with Cel-Fi GO M Booster)
    • Band 12 and 14 for police, fire, and medical with up to 15,000 sq. ft. network safe coverage (with Cel-Fi GO RED Booster)
  • Antenna Pointing Application locates best donor signal to optimize booster performance
  • Eliminates Near Far Effect: Communicates only with desired signal and nulls out other interferers
  • Cloud-based Analytics & Diagnostics for product and network feedback and support
  • TSA friendly and suitable for carry-on

What's Inside

  • Quick Start/Troubleshooting Guide
  • Power Button
  • Nextivity Cel-Fi Signal Booster
  • Omni Directional Server Antenna
  • Omni Directional Donor Antenna
  • SMA Antenna Connector
  • 12V DC Input
  • 110-120V AC Input
  • 12-14V DC
  • AC/DC Flexible Power Cords
    • AC Power Cord
    • DC Power Cable with 12V Auto Connector
    • DC Power Cable with 2.5mm Barrel Connector
  • Cable Pouch

How It Works

The MPA portable amplifier from DH Wireless Solutions is a closed-case, rugged, easy-to-use smart cellular boosting solution. It comes assembled, provisioned with all the hardware and software needed and ready for initial set up to boost cellular connectivity on the go in remote and challenging locations. The MPA is configured for industry-leading 65 dB gain in mobile mode, delivering the best voice/data wireless performance and in stationary mode, it delivers 100 dB gain—which is up 1000x greater than other solutions.

Go to the Google Play or Apple App Store and download the Cel-Fi Wave app to your Android or iOS smart device and connect to your MPA with Bluetooth.

To activate your MPA portable amplifier:

  • Connect the magnetic mount donor antenna to the SMA female jack on the side of the MPA case
  • Position the antenna in a location for best reception of the available cellular signal
  • Plug in the MPA to your AC or DC power source
  • Press the Power Button near the handle; button will illuminate indicating the unit is active
  • The MPA will boot up and self-calibrate automatically blinking green in the LED status window
  • The status LED will turn solid green once the system is fully booted and is boosting

In just minutes, your MPA will be ready to boost specific carrier bands to improve signal anywhere cellular connectivity is available.